Frequently Asked Questions

When we set out to create a better way to cover roll-offs, we asked ourselves, “Why

hasn’t this been done before?” There were some big, bulky systems that were overkill

and there were tarps and tarp and bow systems that are ineffective. We have created

an optimal solution that takes a big job and makes it as simple as possible.

You’re busy, your people are busy, and you’re faced with the problem of getting

your dumpster covered. What you need is a product that not only does the job, but is

easy to use and takes as little of your time and effort as possible. There are other

solutions out there and they are either bigger than they need to be or ineffective with

hardware to install, which can also break.

Our customers report that the biggest benefit of the DumpsterGard system is that it

helps them achieve local, state and federal requirements Roll-Off Dumpster Stormwater

Discharge Compliance. DumpsterGard has helped our customers obtain National

Pollutant Discharge Elimination System (NPDES) stormwater permit exclusions as well

as obtain ISO 14001 Certification. In addition, a DumpsterGard can also reduce tipping

fees by keeping waste dry and give you more control over who and what goes in and

out of your dumpster.

In most cases, yes. Some regulatory agencies are stricter than others and it can depend

on what is being put in the dumpster. Check with your state and local Roll-Off Dumpster

Stormwater Discharge Compliance and Regulatory Offices. They can also tell you if a

DumpsterGard can help you get a NPDES Stormwater Permit Exclusion.

We serve the U.S. and Canada. Please contact us for a quote for shipments to Hawaii, Alaska and Canada.

Our product is made from 90 % + recycled .187′′ thick HMWPE (High Molecular Weight

Polyethylene) plastic with 5% talc and 2% carbon black added. Most of the strength

comes from the ribbed design, not the thickness of the plastic. Talc is added to increase

the stiffness at higher temperatures and to allow the DumpsterGard to hold its shape

over time. Carbon black is added for UV protection.

Each panel weighs 43 lbs. A set consists of 4 panels, so total weight is 172 lbs. Each

panel is 72′′ long by 100′′ wide.

DumpsterGard panels are designed to nest to reduce the space required to store

them and to allow you to stack them while on the dumpster. This eliminates the need to

completely remove the panels, unless you need access to the entire dumpster. Simply

stack the ones you remove on the ones behind them. 40 panels stacked are 38′′ high.

This also allows us to ship them more economically.

Yes, the DumpsterGard system is designed to fit 20, 30 and 40 yard

dumpsters that are 20'-23'Long and approx. 8'W. Dumpsters can bow out in the center up to 4′′ and some are built with a

slight taper. Our design can accommodate these fluctuations.

We can also add or remove panels to accommodate shorter or longer dumpsters. Please call for quotes and have your outside dimensions ready.

Roll-Off Tarps are cumbersome to handle, freeze, hold water, tear easily, mildew and

have to be secured in multiple locations. They will also sag in the middle unless you buy

expensive and difficult to assemble and disassemble bow systems. A DumpsterGard

does everything a roll off dumpster tarp and bow systems claim to do without all the

aggravation.

No, DumpsterGard requires no modification of the dumpster. The securing straps

can hook to existing hooks or other points on the dumpster. If there are none, they can

be secured by hooking to the underneath of the dumpster.